Small Scale Stainless Steel Potato Starch Making Machine Potato Starch Production Line
POTATO STARCH PRODUCTION LINE PROCESS FLOWCHART:
The following flowchart provides a brief overview of the main potato starch production process.
4-Level of Washing + 1-Level of Crushing + 3-Level of Filtering + 6-Level of Desilting + 8-Level of Hydrocyclone
POTATO STARCH PRODUCTION LINE MACHINE DESCRIPTION:
The production of potato starch comprises the machines such as potato washing machine, crushing machine, fine fiber sieve, desander and desilter, starch hydrocyclone, vacuum filter, airflow flash dryer and packaging machine. We have provided below a brief description on the main steps of the potato starch production process.
1. POTATO WASHING MACHINE: wash the fresh potato roots in clean water to remove mud, sand and other impurities. NOTE: The water source should be checked regularly to ensure it is not dirty or contaminated.
2. POTATO CRUSHING MACHINE(STARCH EXTRACTION MACHINE): load the crusher with washed potato roots while the engine is running to crush the potato roots into the potato slurry, and separate to remove the potato residues, to obtain uniformly smooth potato slurry. NOTE: The crushing drum and all food contact areas should be made from stainless steel.
3. FINE FIBER SIEVE(POTATO SIEVING MACHINE): commonly physical operation which is used for the separation of potato residues from potato slurry by interposing a medium(filter) through which only the raw starch milk can pass (depending on the pore size and filter thickness).
4. DESANDER AND DESILTER: solid control equipment that separate sand and silt from the raw starch milk. Desander is installed before the desilter and normally the solids diameter for desander to be separated would be larger than for desilter.
5. STARCH HYDROCYCLONE: classify, separate or sort particles in a liquid suspension based on the ratio of their centripetal force to fluid resistance, this ratio is high for dense and coarse particles, and low for light and fine particles.
6. VACUUM FILTER(POTATO STARCH DEWATERING MACHINE): it's considered a proven technique for separating fines from liquids to realize the starch water content up to 35-40% for the next starch drying.
7. AIRFLOW FLASH DRYER(POTATO STARCH DRYING MACHINE): effectively dry the wet starch to low moisture content by principle of heat transfer exchange, and sieve to obtain fine granules of uniform size, larger particles of starch that are separated should be broken again.
8. STARCH PACKAGING MACHINE: pack desired quantities into a woven polythene sack with a plastic lining, seal or stitch the sack to keep the starch clean and fresh during storage. Properly label the packages according to the standards of national regulatory agencies.
| POTATO STARCH PRODUCTION LINE PRODUCTION SCALE: |
| Dry starch per day | Dry starch per day | Dry starch per day | Dry starch per day | Dry starch per day | Dry starch per day |
| 2 TONS | 5-6 TONS | 10 TONS | 20 TONS | 30 TONS | 40 TONS |
| The above data is calculated based on 20 hours of processing per day |
POTATO STARCH PRODUCTION LINE PROJECT CASE:
POTATO STARCH PRODUCTION LINE MACHINE CLIENT VISITING:
Product Tags:
|
|
Small Scale 109KW 20tpd Potato Flour Processing Machinery Images
|
